Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player


Lalizas IMO Signs

Photoluminescent Sign & Tape Material Specifications

Self-Adhesive Vinyl
Flexible laminated PVC composite material incorporating a photoluminescent layer thermally welded to a white reflective layer, backed with pre-applied adhesive.
Thickness: 0.6mm
Indoor durability: in excess of 5 years
Outdoor durability: good, but can be reduced in strong sunlight and humidity
Toxicity: non-toxic, non-radioactive and contains no phosphorous or lead
Chemical resistance: resistant to most common cleansing agents
Flammability: inherently fire retardant
Adhesive: cross-linked acrylic, pressure sensitive permanent adhesive with silicone release backing paper
Luminance performance: in excess of 46mcd/m2 @ 10min & 4mcd/m2 @ 60min., when tested in accordance with DIN 67510 part 1

Rigid PVC
Laminated PVC sheet incorporating a photoluminescent layer backed by a rigid white reflective substrate and protected by a tough, clear gloss PVC film. All laminations are thermally welded to form a cohesive sheet.
Thickness: 1.2mm
Indoor durability: in excess of 5 years
Outdoor durability: excellent, but can be reduced in strong sunlight
Toxicity: non-toxic, non-radioactive and contains no phosphorous or lead
Chemical resistance: resistant to most common cleansing agents
Flammability: inherently fire retardant
Luminance performance: in excess of 46mcd/m2 @ 10min & 4mcd/m2 @ 60 min., when tested in accordance with DIN 67510 part 1

Non-Photoluminescent Sign & Poster Material Specifications

Self-Adhesive Vinyl
Flexible gloss white vinyl material.
Weight: 110g/m2
Thickness: 80 micron
Dimensional stability: 0.5mm max to DIN30646
Outdoor durability: approximately 2 years
Chemical resistance: no effect from oils, greases, aliphatic solvents, heptane and kerosene
Flammability: self extinguishing
Adhesive: emulsion based, UV resistant, permanent adhesive with high initial tack and adhesion
Gloss: 60 units at 20o in accordance with BS EN ISO 2813:1994. The determination of specula gloss of non-metallic paint films at 20o, 60o & 85o.

Rigid PVC
Opaque rigid white gloss PVC material.
Thickness: 950 micron with UV stabilisation & impact resistance > 650kJ/m2 to BS EN ISO 8256 Plastics - Determination of tensile-impact strength
Dimensional stability: 4% to DIN 53377 @ 140oC/10 min
Chemical resistance: no effect from oils, greases and most common solvents
Cold weather performance: -30oC tested to DIN 53372 Testing of plastic films - Determination of the thickness by mechanical feeling PVC films